How to Installing Compaq Presario CQ62 System board – Part One

Unplug all cables going into laptop. Flip laptop upside down and remove compaq presario cq62 battery.

compaq_presario_cq62_001

compaq_presario_cq62_001

compaq_presario_cq62_002

compaq_presario_cq62_002

compaq_presario_cq62_003

compaq_presario_cq62_003

Remove 3 screws covering panel shown. Remove cover.

compaq_presario_cq62_004

compaq_presario_cq62_004

compaq_presario_cq62_005

compaq_presario_cq62_005

Remove white screw on WLAN card.

compaq_presario_cq62_006

compaq_presario_cq62_006

compaq_presario_cq62_007

compaq_presario_cq62_007

Remove 2 wires connected to WLAN card by pulling directly out. Keep in mind which wire corresponds with which position for reassembly.

compaq_presario_cq62_008

compaq_presario_cq62_008

Remove WLAN card by lifting edge to a 45 degree angle and carefully pulling outward.

compaq_presario_cq62_009

compaq_presario_cq62_009

Remove 2 screws from top cover.Remove top cover.

compaq_presario_cq62_010

compaq_presario_cq62_010

Remove 3 screws holding HDD in place.

compaq_presario_cq62_011

compaq_presario_cq62_011

Disconnect HDD by removing cable connected to system board. Pull cable head directly up with light pressure.

compaq_presario_cq62_012

compaq_presario_cq62_012

Remove HDD by lifting directly up.

compaq_presario_cq62_013

compaq_presario_cq62_013

Remove 10 screws on bottom of laptop.

compaq_presario_cq62_014

compaq_presario_cq62_014

This entry was posted in hp compaq laptop part and tagged . Bookmark the permalink.