compaq_presario_cq62_031

Bottom cable is removed by pulling directly out on cable head with light pressure.

compaq_presario_cq62_032

Top left compaq presario cq62 lcd cable is removed in the same manner.

compaq_presario_cq62_033

Center-left cable is removed by pulling directly up.

compaq_presario_cq62_034

Right cable is removed by lifting black plastic and gently pulling out cable.

compaq_presario_cq62_035

Remove 3 screws on motherboard.

compaq_presario_cq62_036

Remove 2 screws on both sides of display attachment.

compaq_presario_cq62_037

compaq_presario_cq62_038

Begin lifting out system board.  Lift right side of motherboard slightly.  Disconnect compaq presario cq62 led cable by pulling to the right with light pressure.

compaq_presario_cq62_039

compaq_presario_cq62_040

Slowly lift right side of system board .  Carefully remove system board from laptop.

compaq_presario_cq62_041

compaq_presario_cq62_015

Open laptop and view compaq presario cq62 keyboard.

compaq_presario_cq62_016

Begin removing top cover. Apply pressure (preferably with spudger) between cover and frame. Be careful in removal but use moderate pressure when needed.

compaq_presario_cq62_017

NOTE: Cover can not be completely removed until a screw underneath the keyboard is removed. Loosen cover, but do not attempt removal yet.

compaq_presario_cq62_018

Begin removing keyboard. Apply light pressure underneath F1 key to begin lifting keyboard.

compaq_presario_cq62_019

Continue dislodging keyboard along top keys.

compaq_presario_cq62_020

Lift keyboard lightly when completely dislodged along top edge. NOTE- Keyboard is still attached to computer. Do not lift too quickly or you may damage connection.

compaq_presario_cq62_021

Remove last screw on top cover.

compaq_presario_cq62_022

Disconnect keyboard from top cover. To do so, lift the black bar outward and pull out strip gently.

compaq_presario_cq62_023

Disconnect two connections in top left corner. Left is removed by pulling cable lightly directly down. Right is removed by lifting white plastic and gently pulling out strip

compaq_presario_cq62_024

Remove two strips in lower center of cover. Left is removed by flipping white plastic and gently removing strip. Right is removed by flipping black plastic and gently removing strip.

compaq_presario_cq62_025

Finish detaching top cover.

compaq_presario_cq62_026

Remove top cover by lifting directly out.

compaq_presario_cq62_027

View inside components of laptop.

compaq_presario_cq62_028

Remove optical drive.

compaq_presario_cq62_029

Apply moderate pressure on drive outward to remove.

compaq_presario_cq62_030

compaq_presario_cq62_001

compaq_presario_cq62_002

compaq_presario_cq62_003

Remove 3 screws covering panel shown. Remove cover.

compaq_presario_cq62_004

compaq_presario_cq62_005

Remove white screw on WLAN card.

compaq_presario_cq62_006

compaq_presario_cq62_007

Remove 2 wires connected to WLAN card by pulling directly out. Keep in mind which wire corresponds with which position for reassembly.

compaq_presario_cq62_008

Remove WLAN card by lifting edge to a 45 degree angle and carefully pulling outward.

compaq_presario_cq62_009

Remove 2 screws from top cover.Remove top cover.

compaq_presario_cq62_010

Remove 3 screws holding HDD in place.

compaq_presario_cq62_011

Disconnect HDD by removing cable connected to system board. Pull cable head directly up with light pressure.

compaq_presario_cq62_012

Remove HDD by lifting directly up.

compaq_presario_cq62_013

Remove 10 screws on bottom of laptop.

compaq_presario_cq62_014